Displays And Controls - Pepperl+Fuchs IC-KP-B7-V95 Manual

IC-KP-B7-V95
Product Description
4.4

Displays and controls

The following displays and controls are located on the control interface.
PWR/
ERR
Module
Status
Network
Status
Network
Pwr
Com
LED indicators
PWR/ERR
1, 2, 3, 4
Module status
Network status
Network Pwr
Com
Display
Two-line multifunction display with 12 characters per line for displaying different status and
operating information and four pictograms for displaying connected reading heads.
Push buttons
Push buttons are used for controlling the display and selecting commands when
programming the control interface.
12
IC-KP-B7-V95
Part No. 130985
1 2 3 4
Power on
Hardware error
Status display for R/W heads
Command on R/W head is active
Command executed successfully (approx. 1 second)
Device is operating in normal state
Repairable errors (see chapter 9.1)
Irreparable errors – device must be replaced
Configuration requires modification (see chapter 9.1)
LED function test
Online, not connected
Online, connected
Connection timeout
Critical connection error (duplicate MAC ID, bus
error)
Network power supply available
Data transfer (approx. 250 ms)
Return to higher level
Up menu item
green
red
green
yellow
green
red flashing
red
green flashing
red/green
flashing
green flashing
green
red flashing
red
green
Yellow