Table of Contents
Advertisement
Assembly
5.5 Installing the machine
5.5.4
Recommended alignment accuracy
The alignment accuracy required depends essentially on the configuration of the overall
machine train. Observe the required alignment accuracy of the coupling manufacturer in all
cases when aligning the machine.
Table 5- 2
5.5.5
Mounting the drive output elements
The rotor is dynamically balanced. For shaft extensions with feather keys, the type of
balancing is specified using the following coding on the face of the drive end of the shaft
extension and on the rating plate:
• "H" means balancing with a half feather key (standard)
• "F" means balancing with a whole feather key
• "N" means balancing without a featherkey.
Figure 5-1
78
Recommended alignment accuracy
Speed
rpm
0 ... 900
900 ... 1800
1800 ... 3600
DE balancing type
Parallel offset
mm
mm per 100 mm coupling diameter
0.09
0.06
0.03
1MB1.33 Eagle Line shaft heights 71 ... 315
Operating Instructions, 08/2023, A5E52990459A
Angular misalignment
0.09
0.05
0.025
Advertisement
Table of Contents
