Agilent Technologies InfiniiVision 5000 Series Programmer's Manual page 195

5
Commands by Subsystem
• Set waveform persistence.
• Specify labels.
• Save and Recall display data.
Reporting the Setup
Use :DISPlay? to query the setup information for the DISPlay subsystem.
Return Format
The following is a sample response from the :DISPlay? query. In this case,
the query was issued following a *RST command.
:DISP:LAB 0;CONN 1;PERS MIN;SOUR PMEM9
Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide 195