Sbus:uart:count:txframes - Agilent Technologies InfiniiVision 5000 Series Programmer's Manual

5
Commands by Subsystem

:SBUS:UART:COUNt:TXFRames

Query Syntax
:SBUS:UART:COUNt:TXFRames?
Returns the UART Tx frame count.
This command is only valid on 4 (analog) channel oscilloscope models when the
N O T E
UART/RS-232 triggering and serial decode option (Option 232) has been licensed.
Return Format
<frame_count><NL>
<frame_count> ::= integer in NR1 format
Errors •
See Also •
•
•
•
332
(see page 586)
"- 241, Hardware missing"
":SBUS:UART:COUNt:RESet"
"Introduction to :SBUS Commands"
":SBUS:MODE" on page 326
":TRIGger:UART Commands"
Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide
on page 547
on page 330
on page 317
on page 428