Trigger:glitch:lessthan - Agilent Technologies InfiniiVision 5000 Series Programmer's Manual

5
Commands by Subsystem

:TRIGger:GLITch:LESSthan

Command Syntax
:TRIGger:GLITch:LESSthan <less_than_time>[<suffix>]
<less_than_time> ::= floating-point number (5 ns - 10 seconds)
<suffix> ::= {s | ms | us | ns | ps}
The :TRIGger:GLITch:LESSthan command sets the maximum pulse width
duration for the selected :TRIGger:GLITch:SOURce.
Query Syntax
:TRIGger:GLITch:LESSthan?
The :TRIGger:GLITch:LESSthan? query returns the pulse width duration
time for :TRIGger:GLITch:SOURce.
Return Format
<less_than_time><NL>
<less_than_time> ::= a 32-bit floating-point number in NR3 format.
See Also •
•
•
•
390
(see page 586)
"Introduction to :TRIGger Commands"
":TRIGger:GLITch:SOURce"
":TRIGger:GLITch:QUALifier"
":TRIGger:MODE" on page 360
Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide
on page 354
on page 395
on page 393