Agilent Technologies InfiniiVision 5000 Series Programmer's Manual page 504

7
Obsolete and Discontinued Commands
Discontinued Discontinued commands are commands that were used by previous
Commands
oscilloscopes, but are not supported by the InfiniiVision 5000 Series
oscilloscopes. Listed below are the Discontinued commands and the
nearest equivalent command available (if any).
Discontinued Command
ASTore
CHANnel:MATH
CHANnel<n>:PROTect
DISPlay:INVerse
DISPlay:COLumn
DISPlay:GRID
DISPLay:LINE
DISPlay:PIXel
DISPlay:POSition
DISPlay:ROW
DISPlay:TEXT
FUNCtion:MOVE
FUNCtion:PEAKs
HARDcopy:ADDRess
MASK
SYSTem:KEY
TEST:ALL
TRACE subsystem
TRIGger:ADVanced subsystem
504
Current Command Equivalent
:DISPlay:PERSistence INFinite
(see page 201)
:FUNCtion:OPERation (see
page 223)
:CHANnel<n>:PROTection
(see page 189)
none
none
none
none
none
none
none
none
none
none
none
none
none
*TST (Self Test) (see page
none
Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide
Comments
ADD not included
Previous form of this
command was used to
enable/disable 50Ω
protection. The new command
resets a tripped protect and
the query returns the status of
TRIPed or NORMal.
Only parallel printer port is
supported. GPIB printing not
supported
All commands discontinued,
feature not available
114)
All commands discontinued,
feature not available
Use new GLITch, PATTern, or
TV trigger modes