Common
• *CLS (see
Commands (IEEE
• *ESE (see
488.2)
• *ESR (see
• *IDN (see
• *LRN (see
• *OPC (see
• *OPT (see
• *RCL (see
• *RST (see
• *SAV (see
• *SRE (see
• *STB (see
• *TRG (see
• *TST (see
• *WAI (see
Duplicate Mnemonics
Identical function mnemonics can be used in more than one subsystem.
For example, the function mnemonic RANGe may be used to change the
vertical range or to change the horizontal range:
:CHANnel1:RANGe .4
Sets the vertical range of channel 1 to 0.4 volts full scale.
:TIMebase:RANGe 1
Sets the horizontal time base to 1 second full scale.
:CHANnel1 and :TIMebase are subsystem selectors and determine which
range is being modified.
Tree Traversal Rules and Multiple Commands
Command headers are created by traversing down the Command Tree (see
page
referred to as a compound header. A compound header is a header made
of two or more mnemonics separated by colons. The mnemonic created
contains no spaces.
The following rules apply to traversing the tree:
Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide
page
95)
page
96)
page
98)
page
100)
page
101)
page
102)
page
103)
page
104)
page
105)
page
108)
page
109)
page
111)
page
113)
page
114)
page
115)
591). A legal command header would be :TIMebase:RANGe. This is
More About Oscilloscope Commands
11
601