Agilent Technologies InfiniiVision 5000 Series Programmer's Manual page 455

<# points> ::= {100 | 250 | 500 | 1000 | <maximum # points>}
<# points> ::= {100 | 250 | 500 | 1000 | 2000 ... 8000000
If a full screen of data is not displayed, the number of points returned will not be 1000 or an
N O T E
even divisor of it.
See Also
•
•
•
•
•
•
•
Example Code
Example program from the start:
page 672
Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide
if waveform points mode is NORMal
in 1-2-5 sequence | <maximum # points>}
if waveform points mode is MAXimum or RAW
"Introduction to :WAVeform Commands"
":ACQuire:POINts" on page 160
":WAVeform:DATA" on page 451
":WAVeform:SOURce"
":WAVeform:VIEW" on page 470
":WAVeform:PREamble"
":WAVeform:POINts:MODE"
' WAVE_POINTS - Specifies the number of points to be transferred
' using the ":WAVEFORM:DATA?" query.
myScope.WriteString ":WAVEFORM:POINTS 1000"
on page 444
on page 463
on page 458
on page 456
"VISA COM Example in Visual Basic"
Commands by Subsystem
5
on
455