5
Commands by Subsystem
:MEASure:SHOW
Command Syntax
:MEASure:SHOW <show>
<show> ::= {1 | ON}
The :MEASure:SHOW command enables markers for tracking measurements
on the display. This feature is always on.
Query Syntax
:MEASure:SHOW?
The :MEASure:SHOW? query returns the current state of the markers.
Return Format
<show><NL>
<show> ::= 1
See Also
•
278
(see
page
586)
"Introduction to :MEASure Commands"
Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide
on page 257