Upgrading From Mvi56-Mnetcr In Prosoft Configuration Builder - ProSoft MVI56E-MNETCR User Manual

Configuring the MVI56E-MNETCR Module
User Manual
2.2.1 Upgrading from MVI56-MNETCR in ProSoft Configuration
Builder
MVI56E-MNETCR modules are fully backward-compatible with MVI56-MNETCR
modules. However, you will need to convert your MVI56-MNETCR configuration
in ProSoft Configuration Builder to a form that your new MVI56E-MNETCR
module will accept when you download it.
ProSoft Configuration Builder version 2.2.2 or later has an upgrade option that
easily performs this conversion, while preserving all your configuration settings
and any name you may have given your module.
Important: For this procedure, you need to have ProSoft Configuration Builder version 2.2.2 or
later installed on your PC. You can download the latest version from www.prosoft-technology.com.
1 In ProSoft Configuration Builder's tree view, click the
click to open a shortcut menu.
2 On the shortcut menu, select C
Page 40 of 161
Modbus TCP/IP Multi-Client Enhanced Communications Module for Remote Chassis
HANGE
MVI56E-MNETCR ♦ ControlLogix Platform
MODULE
M T MVI56E-MNETCR.
ODULE YPE TO
icon and right-
ProSoft Technology, Inc.