Writing The Ethernet Settings To The Module - ProSoft MVI56E-MNETCR User Manual

MVI56E-MNETCR ♦ ControlLogix Platform
Modbus TCP/IP Multi-Client Enhanced Communications Module for Remote Chassis
The bit will be automatically reset and the current Ethernet settings will be copied
to MVI56EMNETCRETHERNET controller tag as follows.
To check the status of the message, refer to the READETHERNETMSG tag.

5.6.5 Writing the Ethernet Settings to the Module

Expand the MVI56EMNETCRETHERNET controller tag.
Set the new Ethernet configuration in MVI56EMNETCRETHERNET.C
ProSoft Technology, Inc.
Reference
User Manual
ONFIG
Page 143 of 161