ProSoft MVI56E-MNETCR User Manual page 21

MVI56E-MNETCR ♦ ControlLogix Platform
Modbus TCP/IP Multi-Client Enhanced Communications Module for Remote Chassis
3 Set the Module Properties values as follows:
Parameter
Name
Description
Comm Format
Slot
Input Assembly Instance
Input Size
Output Assembly Instance
Output Size
Configuration Assembly Instance 4
Configuration Size
4 On the Connection tab, set the RPI value for your project. Fifty (50)
milliseconds is usually a good starting value.
ProSoft Technology, Inc.
Value
Enter a module identification string. The recommended value is
MNETCR.
Enter a description for the module. Example: M
M -C E C
ULTI LIENT NHANCED
C .
HASSIS
Select D -INT (Very Important)
ATA
Enter the slot number in the rack where the MVI56E-MNETCR
module will be installed.
1
42
2
42
0
ODBUS
M
OMMUNICATIONS ODULE FOR
Page 21 of 161
Start Here
User Manual
TCP/IP
R
EMOTE