Adjustment Of The Presenter Sensor - Star Micronics TUP500 series Technical Manual

1.3 Adjustment of the Presenter Sensor
1. Turn the printer off and unplug the power cord.
2. Remove the screws. Then, remove the board chassis.
3. Using the tip of a ballpoint pen or a similar object, set the DIP switches as follows: DSW1-4 OFF, DSW1-5 ON.
Screw
DIP Switch DSW1
Board chassis
4. Set paper into the presenter portion as shown below.
Lift the paper holder and insert the paper. Rotate the knob toward yourself to set the paper perfectly straight.
Paper Holder
Knob
-  -