Settings (Continued) - Animo OptiFresh Touch Service Book

Service menu continued ...
Main item Sub-item
DEMO MODUS
STOP BUTTON
DIRECT CHOICE
FREE VEND
FREE VEND
IN OPERATOR
MENU
2.04
CUP SENSORS
SETTINGS
(continued...)
OPTILIgHT
DURINg
PREPARATION
TELEMETRY
Item Range
YES-NO
YES-NO
YES-NO
YES-NO
YES-NO
CUP SENSOR LEFT YES-NO
CUP SENSOR RIgHT YES-NO
CUP SENSORS IN
YES-NO
OPERATOR MENU
BLINK DURINg
YES-NO
PROCESS
BLINK RATE 0,1 - 10,0
2.04.16 TELEMETIE
 >GEEN<
OPTILIgHT
 MDB
TELEMETRY
 DEC-UCS
INTERFACE
ANNULEREN
2.04.16 TELEMETRY
 >NONE<
 MDB
 DEC-UCS
CANCEL
2.04.16 TELEMETRIE
REFILL CANISTERS IN
YES-NO
OPERATOR MENU
 >KEINE<
 MDB
 DEC-UCS
BEENDEN
2.04.16 TELEMETRIE
 >AUCUNE<
 MDB
 DEC-UCS
72
ANNULER
OptiFresh (Bean) Touch
Set Description
This function can be used when the
machine is in a showroom or at a
trade fair. The machine does not then
YES need to be connected to a water sup-
ply. In the display, DEMO is shown
on the bottom line. Keys, LEDs and
the Display operate normally.
If this function is standard set to yes.
YES
To deactivate the stop button, set no
If this function is set to Yes, the
chosen product will be started
NO immediately, without the start key
being pressed. Strength setting is not
possible anymore.
Set the machine for free or paid
YES
vending.
Add/remove menu item 1.01 FREE
YES
VEND to the operator menu.
YES
yes; cup sensor active
no; cup sensor inactive
YES
Add/remove menu item 1.10 CUP
YES
SENSORS to the operator menu.
Blinking OptiLight during dispensing
NO
a drink
0,3 Blinking rate setting
R g B RED Colour setting during blinking
>None< : No telemetry system
connected.
OK
MDB: Telemetry system connected
via MBD port. Data transfer via MDB
connection.
DEx-UCS: Telemetry system
connected via DEx port. Data
OK transfer via DEx connection.
Add menu item 1.14 REFILL
NO
CANISTER to the operator menu.
OK
OK
2017/09 Rev. 0.0