Animo OptiFresh Touch Service Book page 31

OptiFresh (Bean) Touch
Cup detection sensor [1003231]
Reflection infrared sensor. This sensor can optionally build in the
machine door. This sensor checks whether there is a cup / mug
positioned under the (correct) spout.
See chapter 3.3 Cup detection for operation.
Ingredient and mixer system
Each of the ingredient canisters is driven by a motor running at
130 rpm. The instant product (ingredient) is pushed out of the
canister by a worm screw and falls via the dispensing nozzle into
the mixer unit. At the same time, hot water is measured into the
mixer unit. The instant product and the water are mixed together
by the mixer impeller driven by the mixer motor running at 16,500
rpm. The drink flows via the drink outlet into the cup. See chapter
See chapter 3.7 Instant group
Water vapour drain system
Most of the water vapour given off during the mixing is collected
by the vapour drain ring and extracted via the extraction tray by
the fan. The instant residue is collected by the extraction tray. The
extraction tray can be easily removed (for cleaning) by dismantling
the mixer unit. This largely prevents water vapour getting into the
canister outlet and the ingredient becoming moist.
See chapter 3.7.1 Ventilation mixer group
There are two door switches on the inside of the right side wall.
Switch A is activated when the door is closed, and switches the
machine off when the door is opened.
Switch B is operated when the door lock is locked and switches
the hot water valve DV4 when the lock is opened.
2017/09 Rev. 0.0
Component
Door switches
31
Image
A
B
EN