Animo OptiFresh Touch Service Book page 55

OptiFresh (Bean) Touch
Operator menu continued...
Main item Sub-item
1.02
SWITCHINg ENERgY SAVE
TIMES MODE
(continued....)
Example:
Three switching times set
Machine automatically switches from Stand-by to ON at 9 am. At 11am back to Stand-by, etc., etc.
During stand-by the key panel is switched off and the boiler temperature drops to the set stand-by temperature (menu 2.4
Settings / Stand-by temp / off - 60-80°C (by default the stand-by temp is set to 'off')
1
9.00 - 11.00
12.00 - 13.00
Three switching times set & Energy save mode activated.
When the machine is ON and it is not in use, it switches to power save after 30 min.
The boiler temperature decreases by 5°C every 30 minutes. If a product is chosen after 2 hours, the machine springs back
into life. In this way, less energy is used if the machine is switched on but is used little or if someone forgot to switch it off.
1
Energy save mode activated (no switching times set)
If there is no dispensing, the machine switches to power save after 30 min. The boiler temperature decreases by 5°C every
30 minutes. If a product is chosen after 2 hours, the machine springs back into life. In this way, less energy is used if the
machine is switched on but is used little or if someone forgot to switch it off.
2017/09 Rev. 0.0
.. Range
ACTIVE YES-NO
TIME 15-240 min.
LCD YES-NO
OPTILIgHT 0-100%
BOILER
OFF / 60-
TEMPERA-
80°C
TURE
2 3
14.00 - 15.00
2 3
Set Description
Active: after the set time the machine
goes to power save (sleep mode) and
YES
uses less energy. The product keys
remain active but the boiler cools down in
steps of 5°C. When a product is chosen,
the machine 'wakes up' and after a short
30 min.
warm-up period is ready for operation
again.
Backlight LCD display during energy save
YES
mode.
15% OptiLight during energy save mode. 0=off
OFF Boiler temperature during power save.
55
EN