Usb Connector - Honeywell THOR VM1 Reference Manual

USB Connector

The USB connector is a D-9 female connector located on the back of the Quick Mount Smart Dock.
Power the Thor VM1 off before attaching a cable to any port (serial, USB, Audio/CAN, etc.).
Pin Signal
1 GND Common ground
2 USBC_D+ USB client data signal (not used)
3 USBC_D- USB client data signal (not used)
4 USB_H1_PWR USB host 1; 5V output power
5 GND Common ground
6 GND Common ground
7 USB_H1_D+ USB host 1 data signal
8 USB_H1_D- USB host 1 data signal
9 USBC_VBUS USB client 5V detect from attached host (not used)
Description
2-13