Usb Connector; Canbus / Audio Connector; Power Supply Connector - Honeywell Thor VM2 User Manual

USB Connector

COM1
COM2
USB
CANBUS/AUDIO

CANbus / Audio Connector

COM1
COM2
USB
CANBUS/AUDIO

Power Supply Connector

3 - 8
The USB connector is a D-9 female connector located on the back of the dock. See
USB Connector (page 10-6) for connector pinout detail.
See Connect USB Host
mation.
Power the Thor VM2 off before attaching a cable to any port (serial, USB, Audio/CAN,
etc.).
The CANbus/Audio connector is a D-15 male connector located on the back of the dock.
The connector supports a headset adapter cable or a CANbus cable. The Thor VM2
does not support connecting audio and CANbus simultaneously.
See CANbus / Audio Connector
A headset cable attaches to the CANbus / Audio connector and provides a quick con-
nect connection for a headset. See
mation.
The CANbus Y cable has a 9 pin F SAE J1939 (Deutsch) and 9 pin M SAE J1939
(Deutsch) connector. See
The CANbus interface is a virtual COM9 port. This port can be accessed using standard
Windows API calls.
Power is supplied to the Thor VM2 through the power connector. Additionally this assembly
provides a connection point for the vehicle's chassis ground to be connected internally to the
conductive chassis of the computer.
The Thor VM2 internal power supply can accept DC input voltages in the range of 10 to 60
Volts DC.
See Power Supply Connector
(page 4-17) for more information on connecting power to the Thor VM2.
(page 4-41) and Connect USB Client
(page 10-8) for connector pinout detail.
Connect Headset Cable
Connect CANbus Cable
(page 10-5) for connector pinout detail. See
(page 4-41) for more infor-
(page 4-42) for more infor-
(page 4-44) for more information.
Connect Power