Vmxd Enhanced Dock For Off-Vehicle Use (Qm3Ac) - Honeywell Thor VM1 User Manual

VMXD Enhanced Dock for Off-Vehicle Use (QM3AC)

Caution: This dock is designed for AC power (non vehicle-mounted)
applications only.
SKU
Power Connector
COM1Connector
COM2 Connector
CANBUS/AUDIO Connector
USB1 Connector
USB2 Connector
USB Host Connector
Ethernet
Power Switch
External Power Supply
Input Power
External Power Supply
Thor VM1 with Microsoft Windows Embedded Standard 2009 User Guide
VMX005VMCRADLE
6-pin connector:
15VDC input power via required AC/DC Adapter
9-pin male, RS-232 serial port, COM1 with power on pin 9
9-pin male, RS-232 serial port, COM2 with power on pin 9
15-pin male, CANbus/Audio connector supports either audio/microphone via adapter cable or
J1939 Female and J1939 Male connectors via CANbus cable
9-pin female, USB connector supports USB host port via adapter cable
Note: USB Client port may not be supported by the Thor VM1 operating system.
15-pin female, USB connector supports two USB host ports via adapter cable
One USB Host connector behind waterproof cap
One RJ45 Ethernet connector behind waterproof cap
Note: The Ethernet port is not supported with the Windows Embedded Standard 2009
operating system.
Sealed power switch
AC Adapter, 120-240VAC to 15VDC
DC Input Voltage: 15VDC,
Input Current: 4 Amps (maximum),
Input Fuse: 8A Time Delay. Replace with same size, rating and type of fuse:
• Littelfuse 0215008.MXP
• Cooper Bussmann BK1/S506-8-R
• Bel Fuse 5HT 8-R
or equivalent.
AC Adapter, 120-240VAC to 15VDC required
Note: This dock for use in AC power applications. See other docks for DC power applications.
235