Enhanced Dock With Thor Vx8/Vx9 Screen Blanking; Vmxd Enhanced Dock For Off-Vehicle Use - Honeywell Thor VM1A User Manual

Enhanced Dock with Thor VX8/VX9 Screen Blanking

This dock is designed for use when the Thor VM1A is replacing a Thor VX8 or Thor
VX9. This dock utilizes the existing vehicle wiring from the earlier computer and
supports screen blanking through that wiring.
SKUs
Power Connection
Serial Ports
USB Ports
Ethernet
Audio
Screen Blanking
Ignition Control
Note: For the VMX Enhanced Dock: COM1 is used for screen blanking (via the power cable
connector) and is unavailable when the screen blanking box is attached. When a
screen blanking box is attached, any external serial device, such as a scanner, must
be connected to the COM2 port on the dock. If a screen blanking box is not connected
via the power cable, the COM1 port on the dock is available for a serial device.

VMXD Enhanced Dock for Off-Vehicle Use

Caution: This dock is designed for AC power (non vehicle-mounted)
SKUs
Power Connection
Serial Ports
USB Ports
Ethernet
Audio
Screen Blanking
Ignition Control
Thor VM1A Vehicle-Mounted Computer
VMX004VMCRADLE
Direct or DC/DC power supply
COM1 and COM2 by means of DB9 male connectors (See note below)
USB1 port provides host connection via an adapter cable
USB2 port provides two USB host ports via an adapter cable
Direct USB host type A connection
RJ-45 Ethernet connection on top of dock
Headset connection via an adapter cable
Supported via COM1 and COM2 connectors
Not supported
applications only.
VMX005VMCRADLE
AC/DC adapter
COM1 and COM2 by means of DB9 male connectors
USB1 port provides host connection via an adapter cable
USB2 port provides two USB host ports via an adapter cable
Direct USB host type A connection
RJ-45 Ethernet connection on top of dock
Headset connection via an adapter cable
Not supported
Not supported
73