Setting The Activation Interval For Sleep Mode (Power-Saving Feature) - Roland VersaUV LEF2-200 User Manual

Hide thumbs Also See for VersaUV LEF2-200:
Table of Contents

Advertisement

Managing the Operations Appropriately and Efficiently

Setting the Activation Interval for Sleep Mode (Power-saving Feature)

This setting is used to set how long it should take until the machine goes into sleep mode (the state in which the
power-saving feature is working) when no print data is received and no operations are performed for a continued
length of time.
Procedure
1.
Press [MENU].
2.
Press [▼] to display the screen shown below.
MENU
SUB MENU
3.
Press [▶].
4.
Press [▼] several times to display the screen shown below.
SUB MENU
SLEEP
5.
Press [▶] twice to display the screen shown below.
INTERVAL
15min
6.
Press [▲] or [▼] to select the time.
You can set the value in units of 15 minutes from 15 minutes to 120 minutes.
7.
Press [ENTER] to confirm your entry.
8.
Press [MENU], then [◀] to go back to the original screen.
MEMO
When "SLEEP SETTING" is set to "DISABLE", the machine does not switch to sleep mode, so this setting is ignored.
RELATED LINKS
・  P. 99 "Deactivating the Sleep Mode (Power-saving Feature)"
98
4. Optimizing Operation Management
15min

Advertisement

Table of Contents
loading

Table of Contents