Roland VersaUV LEF2-200 User Manual page 135

Maintenance That Must Be Performed Daily
SET HEAD
REFRESHER
9.
Check that nothing has been placed on top of the flat table.
Remove any objects to be printed on and jigs that are present.
10.
Attach the head refresher to the flat table in the prescribed location.
IMPORTANT
Be sure to attach the head refresher in this position. Attaching it in the incorrect position may lead to malfunctions caused by
the head refresher hitting the print heads.
11.
Remove the head refresher cover.
IMPORTANT
Do not place the cover on the flat table.
The cover being pinched between the head refresher and a part of the machine may lead to malfunctions. To avoid the risk of
malfunctions, do not place the cover on the flat table.
12.
Attach the head cleaning sheet to the head refresher.
(1)
Open the sheet retaining cover.
(2)
Place the head cleaning sheet on the wiping part of the head refresher.
Place the sheet so that it is aligned with the front position aligning tab (A) and its corners are inside
the L-shaped marks.
(3) Close the sheet retaining cover to secure the head cleaning sheet in place.
Secure the sheet to prevent it from loosening.
Point
To use the head refreshing function to its full effect, make sure that the head cleaning sheet is firmly fixed in place, with
no slack. Failing to secure the sheet sufficiently will not only prevent you from obtaining the full effect of head refresh-
ing but may also lead to print head malfunctions.
134
2. Regular Maintenance