Roland VersaUV LEF2-200 User Manual page 115

Cleaning the Machine
3.
Clean the locations shown in the following figure.
UV-LED device, carriage fan, and the surface of the
print head carriage
Vicinity of the flat table or the object to be printed on
Vicinity of the inlet of the ventilating equipment
4.
When you have finished cleaning, close the front cover.
5.
Press [ENTER].
114
2. Regular Maintenance
Frequently clean the inside of the machine using a vacuum cleaner or
by wiping with a cloth moistened with water then wrung dry. If dust
and dirt accumulate in the machine, they are likely to affix to printed
materials.