Roland VersaUV LEF2-200 User Manual page 140

Only the displayed groups will be cleaned. If A and B are displayed, they will both be cleaned.
7.
Press [ENTER].
The screen shown below appears, and then cleaning starts. The (approximate) remaining time for the proce-
dure is displayed on the screen. (The display shown below is an example. "01:45" = "1 minute and 45 sec-
onds")
CLEANING...
>>
When finished, the screen shown below appears again.
MEDIUM CL.
AB
8.
Press [◀].
9.
Display the printing test menu.
TEST PRINT
Press [▲] several times to display the screen shown below.
It is difficult to check the white ink if the paper for use in the printing test is white. We recommend printing
on transparent paper.
CLEANING
TEST PRINT
TEST PRINT2
Press [▲] several times to display the screen shown below.
Because white ink is printed on a black undercoat, white ink can be easily checked even when printed on
white paper. However, printing takes longer than "TEST PRINT."
CLEANING
TEST PRINT2
10.
Press [ENTER].
Perform a printing test again to check whether the dot drop-out and dot displacement have been corrected.
Point
• If the problem persists, perform normal cleaning or medium cleaning again.
• If problems such as dot drop-out and dot displacement persist even after you have performed normal cleaning or medium
cleaning several times, perform "powerful cleaning."
• This cleaning can be effective when carried out periodically, according to the frequency of use.
RELATED LINKS
・ P. 124 "Printing Tests and Normal Cleaning"
・ P. 140 "Powerful Cleaning Method"
01:45
When Normal Cleaning Is Not Effective
2. Regular Maintenance
139