Roland VersaUV LEF2-200 User Manual page 44

ﾉｰﾏﾙ
AB
6.
Press [◀].
7.
Display the printing test menu.
TEST PRINT
Press [▲] several times to display the screen shown below.
It is difficult to check the white ink if the paper for use in the printing test is white. We recommend printing
on transparent paper.
CLEANING
TEST PRINT
TEST PRINT2
Press [▲] several times to display the screen shown below.
Because white ink is printed on a black undercoat, white ink can be easily checked even when printed on
white paper. However, printing takes longer than "TEST PRINT."
CLEANING
TEST PRINT2
8.
Press [ENTER].
Printing of the test pattern starts.
9.
Check to make sure the dot drop-out or dot displacement has been corrected.
If the problem persists, try performing normal cleaning again. If the printer has been used for a long period,
dot drop-outs may not be fixed even after performing normal cleaning two or three times. If this is the case,
clean using a different method.
IMPORTANT
UV ink will harden. It may adhere to the print head and solidify. If left alone, ink may clog the print heads and cause problems
including printer malfunctions. Clean the head manually when printing frequently with the print head at a distance from the
print surface. This is called manual cleaning. To prevent clogging of the print heads, you may have to perform manual cleaning
each time you print in some cases.
RELATED LINKS
・ P. 138 "When Normal Cleaning Is Not Effective"
・ P. 144 "Manual Cleaning"
Printing method
1. Printing Operations
43