Roland VersaUV LEF2-200 User Manual page 75

Print Area Settings
2.
Changing the Base (Home) Position
Procedure
1.
Press [FUNCTION].
2.
Press [▼] several times to display the screen shown below.
FUNCTION
CHANGE ORIGIN
3.
Press [ENTER].
4.
Press [▲], [▼], [▶] or[◀] when the following screen appears.
SCAN:
FEED:
The flat table and the print heads move so that the pointer points at the previously set printing base posi-
tion.
5.
Press [▲], [▼], [▶] or [◀] to move the pointer until it points to a position in the right foreground of the print area.
MEMO
When the pointer is difficult to see
Depending on the material of the object to be printed on, such as transparent media or high-gloss media with dark colors used
on the print surface, the pointer may be difficult to see. In such cases, the pointer may become more visible by placing masking
tape on the print surface or on the back.
6.
Press [ENTER].
The base (home) position for printing is changed.
The print heads return to the home position and the following screen is displayed.
FUNCTION
CHANGE ORIGIN
7.
Press [FUNCTION] to go back to the original screen.
74
1. Optimizing the Setup Method
0.0mm
0.0mm