Roland VersaUV LEF2-200 User Manual page 144

2.
Start powerful cleaning.
Procedure
1.
Press [ENTER].
MEMO
The screen shown below appears, and then cleaning starts. The (approximate) remaining time for the procedure is displayed on
the screen. (The display shown below is an example. "01:45" = "1 minute and 45 seconds")
CLEANING...
>>
When finished, the screen shown below appears again.
POWERFULL CL.
AB
2.
Press [◀].
3.
Display the printing test menu.
TEST PRINT
Press [▲] several times to display the screen shown below.
It is difficult to check the white ink if the paper for use in the printing test is white. We recommend printing
on transparent paper.
CLEANING
TEST PRINT
TEST PRINT2
Press [▲] several times to display the screen shown below.
Because white ink is printed on a black undercoat, white ink can be easily checked even when printed on
white paper. However, printing takes longer than "TEST PRINT."
CLEANING
TEST PRINT2
4.
Press [ENTER].
Perform a printing test again to check whether the dot drop-out and dot displacement have been corrected.
MEMO
• If the problem persists, perform normal, medium, or powerful cleaning again.
• If problems such as dot drop-out and dot displacement persist even after you have performed normal, medium, or powerful
cleaning several times, perform "manual cleaning."
• This cleaning can be effective when carried out periodically, according to the frequency of use.
RELATED LINKS
・ P. 124 "Printing Tests and Normal Cleaning"
・ P. 138 "Medium Cleaning Method"
・ P. 145 "Manual Cleaning Method"
01:45
When Normal Cleaning Is Not Effective
2. Regular Maintenance
143