Moving the Unit
Step 3: Reinstalling the Machine
Procedure
1.
Once the preparations are complete, move the machine with as little delay as possible.
2.
Reinstall the printer immediately, and then remove the retainer securing the print heads and flat table in place.
For storage, attach retainer A (
3.
Turn on the main power switch.
IMPORTANT
To prevent the print heads from being damaged, move the machine with as little delay as possible and switch on the main
power as soon as possible after moving the machine. To install the machine again, follow the procedure in the Setup Guide.
4.
Press the sub power button.
202
1. Operations When Moving the Unit
) and retainer B (
) using the retaining screws (
).