Roland VersaUV LEF2-200 User Manual page 126

2.
Set the lower-right corner of the object to be printed on to the base printing
position.
Set the base printing position (home position) at the front right of the print area. This method is appropriate when
the print site is level, and you can clearly specify the print area.
Print area setup can be performed with the front cover open. However, if the front cover is left open for approxi-
mately 40 seconds, the print heads automatically return to the home position. The menu returns to the previous
one. Repeat the procedure.
Procedure
1.
Press [◀].
2.
Press [▼] twice, and then press [▶] once to display the screen shown below.
SET BASE POS.
LOWER R CENTER
3.
Press [▲] or [▼] to select "LOWER R".
4.
Press [ENTER] to confirm your entry.
5.
Press [MENU], then [◀] to go back to the original screen.
Maintenance That Must Be Performed Daily
2. Regular Maintenance
125