Roland VersaUV LEF2-200 User Manual page 149

Manual Cleaning
2.
Perform a printing test to check the results.
Procedure
1.
Load the object to be printed on.
2.
Set the print area.
3.
Press [FUNCTION].
4.
Display the printing test menu.
TEST PRINT
Press [▲] several times to display the screen shown below.
It is difficult to check the white ink if the paper for use in the printing test is white. We recommend printing
on transparent paper.
CLEANING
TEST PRINT
TEST PRINT2
Press [▲] several times to display the screen shown below.
Because white ink is printed on a black undercoat, white ink can be easily checked even when printed on
white paper. However, printing takes longer than "TEST PRINT."
CLEANING
TEST PRINT2
5.
Press [ENTER].
Printing of the test pattern starts.
6.
Check whether there is dot drop-out or dot displacement in the test pattern.
Missing blocks indicate dot drop-out. Collapsed or inclined blocks indicate dot displacement.
The following figure shows the "TEST PRINT 2" test pattern.
7.
If you have opened the front cover, close it.
If no dot drop-out or dot displacement occurs, this operation is finished. Press [FUNCTION] to go back to the
original screen.
If dot drop-out or dot displacement is present, perform normal, medium, or powerful cleaning.
RELATED LINKS
・ P. 124 "Printing Tests and Normal Cleaning"
・ P. 138 "Medium Cleaning Method"
・ P. 140 "Powerful Cleaning Method"
148
2. Regular Maintenance