Moving The Unit; Step 1： Cleaning All Print Heads - Roland VersaUV LEF2-200 User Manual

Moving the Unit

Before moving the machine, dispose of the discharged fluid and secure the print heads in place. Attempting to
move the machine without first performing these preparations may result in damage to internal components due
to leaking ink or damage to the print heads.
IMPORTANT
• Once the preparations for moving the machine are complete, move the machine promptly and turn on the machine as soon as
possible after the machine is relocated. If you leave the machine alone without turning it on, the precipitated ink will coagulate and
result in problems such as the clogging of the print heads.
• When moving the machine, keep it at a temperature from 5 to 40°C (41 to 104°F) and at a humidity from 20 to 80% (with no
condensation). Failure to do so may result in a breakdown.
• Handle the machine with care when moving it, keeping it level (not tilted at an angle) and preventing it from striking other objects.
MEMO
Items Required for This Work
• New SOL INK cleaning cartridges: 6 (4 for cleaning and 2 for ink filling)
Step 1： Cleaning All Print Heads
Procedure
1.
Press [MENU].
2.
Press [▼] to display the screen shown below.
MENU
SUB MENU
3.
Press [▶].
4.
Press [▼] several times to display the screen shown below.
SUB MENU
INK CONTROL
5.
[▶]
6.
Press [▶] once, and then press [▼] several times to display the screen shown below.
INK CONTROL
HEAD WASH
7.
Make sure the cleaning liquid is ready.
8.
Press [ENTER].
EMPTY
DRAIN BOTTLE
9.
Open the panel cover.
198
1. Operations When Moving the Unit