Roland VersaUV LEF2-200 User Manual page 73

Print Area Settings
7.
Make sure the "W" (width), "L" (length), and "H" (height) values on the menu screen are as intended.
W:508mm L:330mm
H:100.0mm
MEMO
• If you want to use the print area specified here for the next printing operation, switch "SET AT SETUP" (
the Print Area(P. 85)
area and base position.
• Automatic return is not possible for a set base printing position (home position). In other words, the setting must be config-
ured again if the base printing position (home position) differs, such as when selecting a new object to be printed on.
72
1. Optimizing the Setup Method
) to ""DISABLE"." With this setting, you can set up the object to be printed on without setting the print
Omitting the Setting of