Setting The Activation Interval For Sleep Mode (Power-Saving Feature) - Roland VersaUV LEC2-300 User Manual

Managing the Operations Appropriately and Efficiently

Setting the Activation Interval for Sleep Mode (Power-saving Feature)

This setting is used to set how long it should take until the machine goes into sleep mode (the state in which the
power-saving feature is working) when no print data is received and no operations are performed for a continued
length of time.
Procedure
1.
Press [MENU].
2.
Press [▼] several times to display the screen shown below.
MENU
SUB MENU
3.
Press [▶].
4.
Press [▼] several times to display the screen shown below.
SUB MENU
SLEEP
5.
Press [▶] twice to display the screen shown below.
6.
Press [▲] or [▼] to set the time.
INTERVAL
15min
7.
Press [ENTER] to confirm your entry.
8.
Press [MENU] to go back to the original screen.
MEMO
When "SLEEP SETTING" is set to "DISABLE", the machine does not switch to sleep mode, so this setting is ignored.
RELATED LINKS
・ P. 181 "Deactivating the Sleep Mode (Power-saving Feature)"
180
3. Optimizing Operation Management
15min