Roland VersaUV LEF2-200 User Manual page 167

Handling Severe Dot Drop-out
7.
Limiting Print Heads Used for Printing
Procedure
1.
Check for the nozzle group with dot drop-out or dot displacement by viewing the results of the printing test.
"1" or "2" is the nozzle group. The following shows a dot drop-out in nozzle group 2.
MEMO
If the printing-test results are difficult to interpret
Examine the results from different angles in a well-lit location. It is visible using the reflection of the light.
2.
Start VersaWorks.
3.
Click [Printer] - [Printer Settings].
The [Printer Settings] dialog box appears.
4.
From the [Printer List], select the printer whose print heads will be limited.
5.
Click [Advanced].
The [Advanced] dialog box appears.
6.
Select the print heads to use in printing from the printing-test results.
7.
Click [OK].
Close the [Advanced] dialog box.
8.
Click [OK].
9.
Close the [Printer Settings] dialog box.
10.
The icon is displayed on top of the image of the printer whose setting has been changed.
166
3. Advanced Maintenance