Configuring The Machine's Settings; Setting The Menu Language And The Units; Of Measurement; Setting The Activation Interval For Sleep Mode (Power-Saving Feature) - Roland VersaUV LEF-20 Master Manual

Configuring the Machine's Settings

Setting the Menu Language
and the Units of Measurement
This sets the language and units of
measurement displayed on the operation
panel screen .
Procedure
1.
Hold down [MENU] and switch on the sub
power .
2.
Press [ ] or [ ] to select the display (menu)
language .
MENU LANGUAGE
JAPANESE
MENU LANGUAGE
ENGLISH (default
setting)
JAPANESE
3.
Press [ENTER] .
LENGTH UNIT
mm INCH
4.
Press [ ] or [ ] to select the measurement
unit for length .
LENGTH UNIT
mm (default setting)
INCH
5.
Press [ENTER] .
TEMP. UNIT
ﾟC ﾟF
6.
Press [ ] or [ ] to select the measurement
unit for temperature .
TEMP . UNIT
°C (default setting)
°F
7.
Press [ENTER] .
Explanation
English
Japanese
Explanation
In millimeters (mm)
In inches (in .)
Explanation
In Celsius
In Fahrenheit
Setting the Activation Interval for
Sleep Mode (Power-saving Feature)
This feature sets the time that must elapse
with no operations performed in order to
activate the sleep mode when the sleep mode
SETTING (P .24) has been set to "ENABLE . "
Procedure
1.
Press [MENU] .
2.
Press [ ] to display the screen shown below .
MENU
SUB MENU
3.
Press [ ] .
4.
Press [ ] several times to display the screen
shown below .
SUB MENU
SLEEP
5.
Press [ ] twice .
INTERVAL
15min 15min
6.
Press [ ] or [ ] to select the appropriate time .
INTERVAL
15 min, 30 min
(default setting), 45
min, 60 min, 75 min,
90 min, 105 min, 120
min
7.
Press [ENTER] .
8.
Press [MENU], then [ ] to go back to the
original screen .
Chapter 1 Fully Utilizing the Machine
Explanation
The time that must elapse
with no operations per-
formed in order to activate
the sleep mode .
23