Print Area Settings
2.
Set the base printing position to the center of the print area.
Set the base printing position (home position) in the center of the print area. This setting method is appropriate
when clear specification of the print area is difficult or when the print site is curved or uneven.
Print area setup can be performed with the front cover open. However, if the front cover is left open for approxi-
mately 40 seconds, the print heads automatically return to the home position. The menu returns to the previous
one. Repeat the procedure.
Procedure
1.
Press [▼] twice, and then press [▶] once to display the screen shown below.
SET BASE POS.
LOWER R LOWER R
2.
Press [▲] or [▼] to select "CENTER".
SET BASE POS.
LOWER R CENTER
3.
Press [ENTER] to confirm your entry.
4.
Press [MENU], then [◀] to go back to the original screen.
MEMO
Setting the base printing position to
"CENTER" disables the [FUNCTION CHANGE ORIGIN] menu (
68
1. Optimizing the Setup Method
Changing Just the Base (Home) Position(P. 73)
).