Table of Contents
Advertisement
Preparing to Move the Machine
Step 6: Reinstalling the Machine
Procedure
1.
Once the preparations are complete, move the machine with as little delay as possible.
2.
Reinstall the printer immediately, and then remove the retainer securing the print heads in place.
For storage, attach the retainer in the position indicated in the figure.
3.
Turn on the main power switch.
IMPORTANT
To prevent the print heads from being damaged, move the machine with as little delay as possible and switch
on the main power as soon as possible after moving the machine. To install the machine again, follow the pro-
cedure in the Setup Guide.
4.
Press the sub power button.
5.
Attach the blade that was removed before moving the machine.
RELATED LINKS
・
P. 30Setup of Media
・
P. 294Replacing the Blade
348
Operations When Moving the Unit
Advertisement
Table of Contents
