Step 6: Reinstalling The Machine - Roland VersaUV LEC2-300 User Manual

Step 6: Reinstalling the Machine

Procedure
1.
Once the preparations are complete, move the machine with as little delay as possible.
2.
Reinstall the printer immediately, and then remove the retainer securing the print heads in place.
For storage, attach the retainer in the position indicated in the figure.
3.
Turn on the main power switch.
IMPORTANT
To prevent the print heads from being damaged, move the machine with as little delay as possible and switch on the main
power as soon as possible after moving the machine. To install the machine again, follow the procedure in the Setup Guide.
4.
Press the sub power button.
5.
Attach the media and blade that were removed before moving the machine.
RELATED LINKS
・ P. 27 "Setup of Roll Media"
Preparing to Move the Machine
1. Operations When Moving the Unit
285