Table 5-1. Monitoring Status Codes; Figure 5-3. Continuous Data Screen (Interval 100) And Scroll Bar - Covidien Nellcor Operator's Manual

While viewing Continuous Data, adjust the interval of the displayed readings by pressing OK to display
5.
every 1, 5, 100, or 500 data points. The default interval is 100.
The Status column of the history table will be blank if no errors were present when the data point
was recorded. Status codes are listed in
Operator's Manual
Figure 5-3. Continuous Data Screen (Interval 100) and Scroll Bar
Table 5-1.
Table 5-1. Monitoring Status Codes
Status code
LM Loss of pulse, patient motion
LP Loss of pulse
CB Critically low battery
LB Low battery
SO Sensor off
SD Sensor disconnect
AO Alarm off
AS Alarm silenced
MO Signal interference, patient motion
PS Pulse search
Description
Monitoring History
5-3