Flywheel And Timing Gears - Kubota WSM 07-E3B Series Workshop Manual

07-E3B SERIES, WSM

(9) Flywheel and Timing Gears

Relief Valve
1. Remove the relief valve retaining screw (5).
2. Remove the relief valve (2), the spring (3) and the packing (4).
Relief valve retaining
Tightening torque
screw
(1) Front Cover
(2) Relief Valve
(3) Spring
Side PTO (Option for V3007-DI-T-E3B / V3307-DI-T-E3B)
1. Remove the PTO cover 2 (2) from the flywheel housing (1).
2. Remove the PTO cover 1 (3) with PTO gear assembly (5) from
the flywheel housing (1).
(When reassembling)
• Be sure to place the O-ring (4).
NOTE

• Be careful not to damage the O-ring (4).
(1) Flywheel Housing
(2) PTO Cover 2
(3) PTO Cover 1
(4) O-ring
S-66
ENGINE
69 to 78 N·m
7.0 to 8.0 kgf·m
51 to 57 lbf·ft
(4) Packing
(5) Relief Valve Retaining Screw
W1081251
(5) PTO Gear Assembly
(6) Snap Ring 1
(7) Snap Ring 2
W1124264
KiSC issued 06, 2020 A