Water Pump And Oil Cooler - Kubota V3300-E2B Workshop Manual

V3300-E2B, V3300-T-E2B, WSM

(7) Water Pump and Oil Cooler

Water Pump
1. Remove the pipe band and the water pipe (1).
2. Remove the water pump (2).
(When reassembling)
• When mounting the water pump, take care not to forget mounting
the O-ring and not to let it out of position.
(1) Water Pipe
Oil Cooler
1. Remove the water pipe (1).
2. Remove the oil filter cartridge (2) and the oil cooler joint screw
(3).
3. Remove the oil cooler (4).
Tightening torque Oil cooler joint screw
(1) Water Pipe
(2) Oil Filter Cartridge
S-45
DIESEL ENGINE
(2) Water Pump
W1187742
39.2 to 44.1 N·m
4.0 to 4.5 kgf·m
28.9 to 32.5 ft-lbs
(3) Oil Cooler Joint Screw
(4) Oil Cooler
W1032266
KiSC issued 06, 2006 A