Siemens SINUMERIK 840Di Function Manual page 1367

Pulse diagram
(1)
(2)
(3)
(4)
(5)
(6)
(7)
Call example
CALL FC 9 (
PLC Basic Program Solution Line (P3 sl)
Function Manual, 08/2005 Edition, 6FC5397-0BP10-0BA0
Activation of function
ASUP active
Positive acknowledgment: ASUB ended
Reset function activation after receipt of acknowledgment
Signal change by means of FB
Not permitted If function activation is reset prior to receipt of acknowledgment, the output
signals are not updated without the operational sequence of the activated function being
affected.
Negative acknowledgment: Error has occurred
//Start an asynchronous subroutine
//in channel 1 interrupt number 1
Start :=
ChanNo :=
IntNo :=
Active :=
Done :=
Error :=
StartErr :=
Ref :=
I 45.7,
1,
1,
M 204.0,
M204.1,
M 204.4,
M 204.5,
MW 200);
Detailed Description
2.12 Block descriptions
2-173