Siemens SINUMERIK 840Di Function Manual page 1360

Detailed Description
2.12 Block descriptions
Declaration of the function
STL representation
FUNCTION FC 8: void
//NAME :TM_TRANS
VAR_INPUT
END_VAR
VAR_OUTPUT
END_VAR
BEGIN
END_FUNCTION
Description of formal parameters
The table below lists all formal parameters of the TM_TRANS function:
Signal
Start
TaskIdent
TaskIdentNo
NewToolMag I
NewToolLoc
2-166
Start:
TaskIdent:
TaskIdentNo:
NewToolMag:
NewToolLoc:
OldToolMag:
OldToolLoc:
Status:
Ready:
Error :
Type Type
I Bool
I Byte
I Byte
Int
I Int
BOOL ;
BYTE ;
BYTE ;
INT ;
INT ;
INT ;
INT ;
INT ;
BOOL ;
INT ;
Value range Remarks
1 = Start of transfer
1..5 Interface or tank identifier
1: Loading/unloading location
2: Spindle change position
3: Revolver change position
4: Asynchronous transfer
5: Asynchronous transfer with
location reservation
1.. Number of associated interface or channel number.
The upper nibble can specify the interface number
for asynchronous transfer (e.g., B#16#12, 1st
interface, 2nd channel).
1, 0.. Current magazine number of new tool
-1: Tool remains at its location NewToolLoc = any
value. Only with TaskIdent = 2 permissible.
0 to max. Current location number of new tool
location
number
Function Manual, 08/2005 Edition, 6FC5397-0BP10-0BA0
PLC Basic Program Solution Line (P3 sl)