Siemens SINUMERIK 840Di Function Manual page 1352

Detailed Description
2.12 Block descriptions
//Assigned to basic program
GP_IRFromNCK : BOOL ;
GP_TM : BOOL ;
GP_InPosition : ARRAY[1..3] OF BOOL;
GP_AuxFunction : ARRAY[1..10] OF BOOL;
GP_FMBlock : ARRAY[1..10] OF BOOL;
//Further local user data may be defined from this point onwards
END_VAR
BEGIN
END_ORGANIZATION_BLOCK
2.12.13 FC 5: GP_DIAG Basic program, diagnostic alarm, and module failure
Description of functions
Description of functions
Module defects and module failures are detected in this section of the basic program.
The FC5 block parameter can be used to define whether the PLC is to be placed in STOP
mode. The PLC is placed in STOP mode only for incoming events. The PROFIBUS MCPs
assigned on FB1 are excluded from stopping the PLC.
Declaration
FUNCTION FC 5: VOID
2-158
OB40_DATE_TIME :
CALL FC 3;
//INSERT USER PROGRAM HERE
VAR_INPUT
PlcStop: BOOL := True;
END_VAR
DATE_AND_TIME;
//Interrupt by NCK for user
//Tool management
//Axis-oriented for positioning and
//indexing axes, spindles
//Channel-oriented for //auxiliary
functions
//Channel-oriented for block
//transfer to FM (available soon)
PLC Basic Program Solution Line (P3 sl)
Function Manual, 08/2005 Edition, 6FC5397-0BP10-0BA0