Table of Contents
Advertisement
QUALIFIED
INSTALLER
Existing Glass Doors and Wire Screens
Existing glass doors must be permanently removed
prior to installing the 738K insert.
Combustible Mantels
Combustible mantel clearances must conform to those
required for the original solid-fuel fi replace into which
the 738K is being installed.
Unpack the appliance
Beware of sharp edges! Wear gloves!
1. Unpack the appliance.
2. Unpack any loose items from around the appliance
and check against the Pack Content list provided in
the documentation package.
3. Remove the window and set aside in a safe place to
avoid damage.
4. Verify that you have all the components required
for the installation, including:
- brick panels & logs;
- surround/doors/fret;
- venting components and accessories.
Remove Window
The window is held in place by four spring-loaded bolts,
two at the top and two at the bottom.
1. To remove the window, turn each bolt a quarter turn
to disengage the bolt pin.
2. Gently pull the bottom of the window outward and
unhook it from the fi rebox's opening frame.
3. Set the window aside in a safe place to avoid
damage.
26
Existing Fireplace Preparation
Attach Warning Conversion Plate to Existing
Fireplace (label supplied loose with 738K
heater)
Attach the "This fi replace has been converted..."
label to the existing fi replace using screws or other
mechanical means and store any removed parts in
back of the existing fi replace for future use.
Installation
Advertisement
Table of Contents
