Industrial Applications - Siemens SIDOOR AT40 System Manual

Areas of application

4.2 Industrial applications

4.2 Industrial applications
Industrial applications
We offer the following controllers for industrial applications:
● SIDOOR ATD400K
The SIDOOR ATD400K RELAY LB and SIDOOR ATD400K RELAY RC industrial door
drives offer the optimal drive solutions for cold room gates weighing up to 400 kg. The
ATD400K RELAY LB model enables the connection of light barriers with "LB" logic, and
the ATD400K RELAY RC model enables the direct connection of a cord-operated switch
to open the gate.
Both drives meet the requirements of EN ISO 13849-1:2008 with regard to safety of
machinery and EN 12453:2000, section 5.2 with regard to safety in use of power
operated doors.
● SIDOOR ATD4xxW
ATD4xxW machine tool door drives are "intelligent" door drives that can be used to
operate protective doors on machine tools. The safe functions - force limitation, energy
limitation and end position detection - fulfill the requirements according to
DIN EN ISO 13849-1:2008 for Category 2 and Performance Level d. The drives are
suitable for power-operated guards according to EN 953:1997+A1:2009 Section 5.2.5.2
"Actuating forces".
The SIDOOR ATD4xxW door controller enables connection to diverse fieldbus systems.
This makes integration into the industrial//Simatic environment possible. PROFINET IO,
PROFIBUS DP and USS are currently specified as fieldbuses. The PROFIBUS "variable-
speed drives" profile is generally used as the higher-level device profile.
– SIDOOR ATD401W
– SIDOOR ATD410W
– SIDOOR ATD420W
– SIDOOR ATD430W
30
The "offline" relay variant can be used for simple automation tasks. As there is no
possibility of interfacing to a bus, it provides a limited scope of functions.
The controller is interfaced to a USS bus by means of a modular USS module.
You can find more detailed information about the USS protocol online at Industry
Online Support (http://support.automation.siemens.com/WW/view/de/24178253/0/en).
The PROFIBUS DP interface is realized by means of a modular PROFIBUS module
(AT-PB). This is an intelligent module that comes with its own firmware.
The PROFINET IO interface is realized by means of a modular PROFINET module
(AT-PN). This is an intelligent module that comes with its own firmware.
AT40, ATD400V, ATD400K, ATD4xxW, ATD400S, ATE250S, ATD400T
System Manual, 06/2016, A2B00096162-AN