Controllers
6.4 Operation and parameter assignment
6.4.1
Service buttons / Minimal editor
Overview
SIDOOR AT40 / ATD400V / ATD400W / ATD4xxW / ATD400K / ATD400S / ATD400T
①
②
③
④
Image 6-21
SIDOOR ATE250S
See Section Terminal module (Page 116).
6.4.1.1
Service buttons
"H401" 7-segment display
You can see the operating states on the "H401" 7-segment display. You will find the
description of the 7-segment display in Section Operating state display (Page 183).
Learn run button
You can start a learn run with the learn run button (S401 / S1*).
* SIDOOR ATE250S
Note
Two types of learn run can be carried out. See Section Learn run (Page 83).
110
7-segment display
Learn run button
Service button OPEN
Service button CLOSE
Overview of minimal editor
AT40, ATD400V, ATD400K, ATD4xxW, ATD400S, ATE250S, ATD400T
System Manual, 06/2016, A2B00096162-AN