Optional Additional Units - Siemens SIDOOR AT40 System Manual

3.1.5

Optional additional units

Additional units meet a range of customer requirements in order to ensure the universal
implementation and maintenance of the system.
The additional units are easy to connect to a deenergized controller via the interfaces
provided – and are available for use as soon as the power supply is connected.
Selection of additional units
Additional unit
SIDOOR EMC FILTER
SIDOOR AT-EB expansion unit
(with FW1.10)
SIDOOR Service Tool
AT40, ATD400V, ATD400K, ATD4xxW, ATD400S, ATE250S, ATD400T
System Manual, 06/2016, A2B00096162-AN
Article No.
6FB1104-0AT20-0AT0
6FB1135-2BM10-0CP0
6FB1105-0AT01-6ST0
Description
A line filter must be installed in the DC power supply to the
SIDOOR ATD400T RELAY controller to comply with the EMC
requirements for emitted interference set out in EN 50121-3-
2.
The SIDOOR AT-EB expansion unit enables SIDOOR con-
trollers to be connected via a PROFIBUS DP interface, and
makes additional input and output signals available.
The SIDOOR AT-EB expansion unit controls up to two door
control systems via the proprietary RS 485 interface.
The SIDOOR Service Tool may be used to input door com-
mands, to change drive parameters and to read the learnt
parameters, door states, input and output signals, service
data and the current firmware version.
Product family
3.1 Products
27