Profinet Module - Siemens SIDOOR AT40 System Manual

Controllers
6.6 Connecting terminals and interfaces
6.6.6.3

PROFINET module

Overview
①
Cable ties
②
X1000 - Port 2
③
X1000 - Port 1
④
X100
⑤
Protective cover
An ASIC of the "ERTEC200P" type is used for interfacing to PROFINET. Ethernet is used as
the transmission technology. The SIDOOR ATD430W controller supports conformance class
C (CC-C).
All further IO device functionality of the SIDOOR ATD430W controller is described in the
GSD file.
You will find explanations of the basic functions and communication properties of the
SIDOOR ATD430W IO device in Section Communication to PROFINET (Page 191).
Task
The PROFINET module enables the SIDOOR ATD430W door controller to be connected to
a PROFINET fieldbus.
Interface
Communication between the basic module ATxx and the PROFINET module takes place on
an internal bus.
148
AT40, ATD400V, ATD400K, ATD4xxW, ATD400S, ATE250S, ATD400T
System Manual, 06/2016, A2B00096162-AN