Installation Space - Panasonic LP-GS Series Setup & Maintenance Manual

2-2 Installation Space

To keep the appropriate air cooling performance, provide space around the laser marker as shown in the following figure.
„ Head
„ Controller
• To maintain the air-cooling performance of the laser marker, install both the head and controller in a well-ventilated
place.
• Installing near a heating element could cause the ambient temperature exceeding the specification range, which may
cause malfunction of the product.
• When setting more than one laser marker, install them so that a space of 300 mm or more is given between the heads of
each marker. Not doing so may cause malfunction. It may cause malfunction.
34
q
50mm
150mm
q
50mm
150mm
ME-LPGS-SM-8
w
200mm
50mm
q
w
w
200mm
50mm
q
w
Intake
Exhaust
Intake
Exhaust